|
Display: 4
digit liquid crystal display with indicators.
Averaging periods: Display
will update every 3 seconds. At low background levels, the
update is the moving average for the past 30 second time
period. Timed period for moving average decreases as the
radiation level increases.
Operating Range:
mR/hr - .001 (1µR)
to 100 mR/hr
µSv/hr
- .01 to 1000
CPM - 0 to 300,000
CPS - 0 to 5000
Total/ Timer - 1 to 9,999,000 counts
Accuracy:
mR/hr ± 15% from 0 to 30 mR/hr.
mR/hr ± 20% from 30 to 50 mR/hr.
CPM ± 15% from 0 to 100,000 CPM.
CPM ± 20% from 100,000 to 300,000 CPM.
(Referenced to Cs-137)
Sensitivity to Common
Isotopes: Typical GM tube efficiency for 4 pi geometry at
contact.
| Beta
Isotopes |
Energy |
Efficiency |
| C-14 |
49
keV Avg. 156 keV |
5.3% |
| Bi-210 |
390
keV Avg. 1.2 MeV Max. |
32% |
| Sr(Y)-90 |
546
keV and 2.3 MeV |
38% |
| P-32 |
693
keV Avg. 1.7 MeV max. |
33% |
| Alpha |
|
|
| Am-241 |
5.5
MeV |
18% |
Gamma Sensitivity: 3500
CPM/mR/hr referenced to Cs-137. Smallest detectable level for
I-125 is .02 µCi
at contact.
Timer: Can set
1 minute sampling periods from 1 to 10 minutes. 10 minute
sampling periods 10- 60 minutes. 1 hour sampling periods from
1 to 24 hours.
Count Light: Red
LED flashes with each radiation event.
Audio Indicator: Internally
mounted beeper (can be switched off for silent operation).
Outputs: Dual
miniature jack drives CMOS or TTL devices: count to computer
or datalogger. Submini jack input allows for electronic
calibration.
Anti-Saturation: Meter
will hold at full scale in fields as high as 100 times the
maximum reading.
Power Requirements:
One 9 volt alkaline battery. Battery life is min. 200 hours at
normal background radiation levels.
Temperature Range:
-10ºC to 50ºC (14ºF to 122ºF).
Weight: 301.4
grams (10.6 oz.) without battery. Inspector EXP: 1 lb. 15.6
oz. (420g).
Size: 150 x 80
x 30 mm (5.9 x 3.3 x 1.2 in.).
Utility Menu: The
Utility Menu offers several options accessible by holding down
the + button while turning the instrument on.
- 3 second (fast response)
- Switches from mR/hr and CPM
to µSv/hr
and CPS
- Reset the cal factor to 100.
- Probe adjustment settings.
- Adjust the CAL factor.
- Reset all setting to
original factory setting (default).
Includes: 1
year limited warranty and CE mark Carrying
Case Inspector. Carrying
Case Inspector+ EXP or Inspector+ EXP only- Cable 42" Beldon 9853 with Amphenol 31226 twinax connectors.
Accessories
Stand
- For use with the
Inspector+ Digilert 50, and Geiger.
- Whether you need to
perform area monitoring or scan your hands and
items for contamination, the STAND offers a
convenient way for the instrument to STAND
vertically while leaving your hands free for other
tasks.
- The STAND is made
from electro-polished stainless steel.
- Double stick
adhesive strips are included to mount the STAND in
a permanent location.
- The STAND fits in
the carrying case with the instrument
|
 |
 |
Carrying Case
- Carrying case
included with models M4, M4EC, M5, MC1K,
Inspector+, Digilert 50 and Geiger.
- Carrying cases are
equipped with belt clip or belt loop (Inspector,
Digilert 50 and Geiger).
|
|
Ruggedized Inspector
Case
Ideal for military applications, this is the ultimate
case for protection from severe weather, drops, and
more. made from a nearly indestructible material,
it has been designed to house your Inspector+ in a
dustproof, air proof, and watertight case while still
providing you with access to your Inspector+ data.
(Gamma detection ONLY)
Meets ANSI Standard (42.33) for homeland security
Waterproof, dustproof & airtight Crushproof.
Size: Inches 8.5" x 1.37" x 2.4"
|
Easily use the Inspector+ through
recessed, clear plastic screen |
 |
|
 |
 |
|
 |
 |
|
 |
 |
| |
|
| |
|
