|
| |
Radiation Detection
Area Monitors Portable
- AMP 100
PDF
file AMP - 50
AMP -200
|
The AMP-100 Area Monitor
Probe is a GM tube based rate meter. It is a state-of-the-art
microprocessor-based instrument, designed for highly stable and accurate
measurements of dose rate and integrated dose rate gamma radiation. |
| The AMP-100 covers a measuring
range of 0.001 R/h up to 1000 R/h. It is a lightweight and compact
instrument with a large, four 7-segment LCD. The AMP-100 sophisticated
software offers special features and optimal performance. The wide
dynamic range from 0.001 R/h to 1000 R/h, is obtained by automatic dead
time correction, according to the preset calibration. A special
averaging function softens the readout and maintains fast response time,
while keeping the standard deviation at a minimum. |
 |
|
Features |
Waterproof to at
least 20 meters depth.
Rugged, lightweight construction (~2Kg)
Digilog, continuous ranging, combined digital and analog, LCD display
Readout of dose rate and accumulated dose
Units of either mR or µSv
Programmable alarm thresholds
Compatible with RMV software for pc data downloads
Smart software provides fast, yet stable response
Dead time correction
Alarms for detector overflow, low battery and detector failure
Automatic self diagnostic routine |
|
Technical
Description |
|
The
Area Monitor Probe (AMP-100) is a high-range GM tube-based detector
designed to be continuously used in areas where high exposure levels
exists.
The
instrument consists of three parts: the Meter box ( which includes the
display unit, operating pushbuttons and detector’s electronics); The
probe head, which contains the GM tube; and the connecting cable,
which is fitted with quick-connect-type connectors at each end.
The AMP-100’s connections and probe head feature watertight
sealing to allow for use in underwater applications |
|
Specifications |
| Display
: |
|
LCD
Display showing: Detector failure, Low battery, Overflow,
Threshold |
| Measuring
Range: |
|
10µSv/hr
to 10Sv/hr (10 mR/h to 1000 R/h) |
| Sensitivity
(137Cs): |
|
0.3
cps/mR/h(137Cs) |
| Accuracy: |
|
±10%
of reading within measuring range |
| Units: |
|
mR/h
and mR or m Sv/h and m Sv |
| Controls: |
|
Four
key keypad with positive feedback. Key combinations for
programming operating parameters. |
| Power
Source: |
|
One
9-volt cell battery or external 9V power supply, 50 hours
minimum continuous operation, using an alkaline battery
(speaker off)
Automatic battery check under full load (without backlighting) |
| Temperature
Range: |
|
Operation:
-10° C to +50° C (15° F to 122° F)
Storage: -20° C to +60° C (-5° F to 140° F) |
|
Humidity Range
(case):
|
|
40%
to 95% RH (non condensing) |
| Casing
material: |
|
Meter:
Aluminum
Detector: Aluminum, waterproof |
| Dimensions: |
|
Meter:
12 cm x 7.2 cm x 3.4 cm (4.72" x 2.83" x 1.34")
Detector: Diameter: 2.45 cm x Length: 14.3 cm (0.96" x
5.71’) without cable |
| Weight: |
|
Meter:
340 g (0.76 lbs) including battery
Detector: 131 g (0.29 lbs) without cable |
| Std.
Cable Length: |
|
25
ft. |
| Max.
Cable Length: |
|
350
ft. |
Accuracy,
range and sensitivity details are related to 137Cs |
|
Ordering
Number:_ #4-0021 |
|
